092 Of all the files stored on the memory, the unprotected filesin the DCIM subfolder will be deleted. Remember that thiswill permanently delete unprotected images. Important shotsshould be stored on a computer before deletion takes place.The startup image is stored on the camera’s internal memory(i.e., not on the memory card) and it will not be deleted even ifyou delete all files on the memory.Protecting imagesThis is used to protect specific shots from being accidentally erased (Lock).It also unprotects images that have been previously protected (Unlock).1. Press the Up / Down button and selectthe [Protect] menu tab. And then pressthe Right button.2. Select a desired sub menu by pressing theUp / Down button and press the OK button.[Select ] : Selection window for animage to be protected /released is displayed.- Up / Down / Left / Right : Select an image- OK button : Protect / release theimage- Fn button : Your changes will besaved and the menu willdisappear.File Options ( )[All] : Protect / release all saved images- If you protect an image, the protecticon will be displayed on the LCDmonitor. (An unprotected image hasno indicator)- An image in LOCK mode will beprotected from the delete functionor [Delete] function, but will NOT beprotected from the [Format] function. Image protection is enabled when selecting an image in playbackmode and pressing the image protection button. ( )Select Set1 31211 5Back SetProtectFace List Edit :Edit RankingRecycle Bin :OffVoice memo :OffDeleteDPOFCopy to CardProtect All?LockUnlockBack SetProtectFace List EditVoice memo :OffDPOFDeleteCopy to CardSelectAll