Shooting options 39Shooting in the darkFlash options are not available if you set burst options or selecttSelf-Portrait or Blink Detection.Make sure that your subjects are within the recommended distancetfrom the flash. (p. 86)If there is reflected light or much dust in the air, tiny spots may appearton your photo.Adjusting the ISO speedThe ISO speed is the measure of a film’s sensitivity to light asdefined by the International Organisation for Standardisation (ISO).The higher ISO speed you select, the more sensitive to light yourcamera becomes. With a higher ISO speed, you can get a betterphoto without using the flash.In Shooting mode, press [1 m].Select2 Functions ISO an option.Selectt to use an appropriate ISO speed based on thebrightness of the subject and lighting.The higher ISO speed you select, the more image noise you may get.tWhent Motion Capture is set, ISO speed will be set to Auto.When you set the ISO speed to 3200, you can select only 3M ortlower resolution.pOption DescriptionRed-eye Fix*:The flash fires when the subject or background istdark.The camera corrects red-eyes through its advancedtsoftware analysis.Slow Sync:The flash fires and the shutter stays open longer.tSelect this when you want to capture ambient light totreveal more details in the background.Use a tripod to prevent your photos from blurring.tFill in:The flash always fires.tLight intensity is adjusted automatically.tRed-eye*:The flash fires when the subject or background istdark.The camera reduces red-eyes.tAuto: The flash fires automatically when the subject orbackground is dark.The options may differ depending on the shooting mode.* There is an interval between two bursts of the flash. Do not move untilthe flash fires a second time.