《81》Setting up the application software■ To use this camera with a PC, install the application software first.After this has been done, the stored images in the camera can be moved to thePC and can be edited by an image editing program.■ You can visit the Samsung web-site through the internet.1. The auto run frame will display.Click the [Install] menu in the Auto runframe.http://www.samsungcamera.com : Englishhttp://www.samsungcamera.co.kr : KoreanAbout the softwareAfter inserting the CD-ROM provided with this camera into the CD-ROM drive, thefollowing window should automatically run.Before connecting the camera to the PC,you should first install the camera driver.Depending on the Operating System (OS),screen captures illusted on this manual canbe varied.■ Camera driver : This enables images to transfer between the camera andPC.This camera uses the USB Storage Driver as the camera driver. You can usethe camera as a USB card reader. After installing the driver and connecting thiscamera to the PC, you can find [Removable Disk] in [Windows Explorer] or [Mycomputer]. A USB Storage Driver is provided only for Windows. A USB Driverfor MAC is not included with the Application CD. You can use the camera withMac OS 9.0 ~ 10.4.■ Digimax Master : This is the all-in-one multi media software solution.You can download, view, edit and save your digital images and movie clips clipwith this software. This software is only compatible with Windows.■ QQuuiicckkTTiimmeePPllaayyeerr::TThheepprrooggrraammffoorrppllaayyiinnggbbaacckkQQuuiicckkTTiimmeemmoovviieess((..MMPP44))..ItcanalsoplayvideofilescompressedwithMPEG4codec.● Be sure to check the system requirements before installing the driver.● You should allow 5 ~ 10 seconds for running the automatic setup programaccording to the capability of your computer. If the frame does not show, runthe [Windows Explorer] and select [Samsung.exe] in the CD-ROM Driveroot directory.INFORMATION