14• Dial the extension number or group number.• Wait for the party to answer. If you hear a brief tone burst instead ofringback tone, the station you called is set for Voice announce orAuto answer. Begin speaking immediately after the tone.• Finish the call by replacing handset or press ANS/RLS key.NOTES: 1. If you have a DSS key assigned to an extension or stationgroup, you may press this key instead of dialing thenumber.2. If the Hot Keypad feature has been turned off, you mustfirst lift the handset or press SPK before you begin dialing.ANSWERING INTERCOM CALLS• When your keyset rings, simply lift the handset - OR- press theANS/RLS key to be connected to the calling station.• Finish call by replacing handset or pressing ANS/RLS button.See Ring Preference under Customizing Your Keyset.VOICE ANNOUNCE MODE(INTERCOM CALLS ONLY)When another station calls you, your keyset will sound a briefattention tone and you will hear the caller's announcement.• Press ANS/RLS to turn on microphone and speak handsfree - OR -lift the handset to reply.• To finish the call, replace the handset or press the ANS/RLS key.I N TERCOM CALLSCALLING OTHER STATIONS≈∞∆˘ 99.1.20 2:58 PM ∆‰¿Ã¡ˆ14
