2DCS provides distinctive ring patterns to your keyset:• Outside calls have a single ring tone repeated.• Internal calls have a double ring tone repeated.• Door phone calls and alarm/appointment reminders have a shortring tone repeated very quickly.CALL INDICATIONSThe keys on your phone have light emitting diodes (LEDs). Some ofthese are tri-coloured LEDs that light green, red or amber (green andred together). Some of the keys can only light red.Intercom calls, also called internal calls, always appear on your CALLbuttons. They will always light green. You can have up to eight CALLbuttons, but two are recommended.Outside calls appear on individual line keys if they are assigned. Whenan individual line is not assigned to its own key, it will appear on aCALL button. Your outside calls will light green on your keyset andred on other keysets.You never lose sight of your calls while they are on hold. They stayright where you put them and are identified with a green flashinglight.Some simple rules to remember:• Any steady LED indicates the line or feature is in use.• A fast flashing green LED indicates a new call ringing in.• A slow flashing green or red LED indicates a call is on hold.• A slow flashing amber LED indicates a recall to your keyset.SPEAKERPHONEPressing the ANS/RLS key will answer or release a call on the speakerphone. Switching from the handset to the speakerphone is easy. Pressthe SPK key and hang up the handset.≈∞∆˘ 99.1.20 2:57 PM ∆‰¿Ã¡ˆ2