15English03 Basic FeaturesPicture OptionsIn PC mode, you can only make changes to the✎ ColourTone, Size and Auto Protection Time.Colour Tone (Cool / Normal / Warm1 / Warm2)■Warm1✎ or Warm2 will be deactivated when thepicture mode is Dynamic.Settings can be adjusted and stored for each✎ external device connected to an input on the TV.Size■ : Your cable box/satellite receivermay have its own set of screen sizes aswell. However, we highly recommendyou use 16:9 mode most of the time.Auto Wide: Automatically adjusts thepicture size to the 16:9 aspect ratio.16:9 : Adjusts the picture size to 16:9 for DVDs or widebroadcasting.Wide Zoom: Magnifies the picture size more than 4:3.Adjusts the Position by using✎ ▲, ▼ buttons.Zoom: Magnifies the 16:9 wide pictures vertically to fitthe screen size.Adjusts the Position or Size by using✎ ▲, ▼ button.4:3 : The default setting for a movie or normalbroadcasting.Do not watch in 4:3 format for a long time. Traces✎ of borders displayed on the left, right and centreof the screen may cause image retention(screenburn) which are not covered by the warranty.Screen Fit: Displays the full image without any cut-offwhen HDMI (720p / 1080i / 1080p) or Component(1080i / 1080p) signals are input.NOTE✎ After selectingx Screen Fit in HDMI (1080i / 1080p) orComponent (1080i / 1080p) mode, you may need tocenter the picture:1. Press the ◄ or ► button to select Position.2. Press the ENTERE button.3. Press the ▲, ▼, ◄ or ► button to move thepicture.Depending on the input source, the picture sizex options may vary.The available items may differ depending on thex selected mode.In PC mode, onlyx 16:9 and 4:3 modes can be adjusted.Settings can be adjusted and stored for eachx external device connected to an input of the TV.If you use thex Screen Fit function with HDMI 720pinput, 1 line will be cut at the top, bottom, left andright as in the overscan function.■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3):Available only when picture size is set to Auto Wide.You can determine the desired picture size at the 4:3WSS (Wide Screen Service) size or the original size.Each European country requires different picture size.Not available in PC, Component or HDMI mode.✎Digital Noise Filter (Off / Low / Medium / High / Auto■/ Auto Visualisation): When the broadcast signal isweak, some static and ghosting may appear. Select oneof the options until the best picture is displayed.Auto Visualisation: When changing analogue channels,displays signal strength.Only available for analogue channels.✎ When✎ bar is green, you are receiving the bestpossible signal.MPEG Noise Filter (Off / Low / Medium / High /■Auto): Reduces MPEG noise to provide an improvedpicture quality.Disabled under PC mode.✎HDMI Black Level (Normal / Low)■ : Selects the blacklevel on the screen to adjust the screen depth.Available only in HDMI mode (RGB signals).✎Film Mode (Off / Auto1 / Auto2)■ : Sets the TV toautomatically sense and process film signals from allsources and adjust the picture for optimum quality.Available in TV, AV, COMPONENT (480i / 1080i)✎ and HDMI (480i / 1080i).Motion Plus (Off / Clear / Standard / Smooth /■Custom / Demo) : Removes drag from fast scenes witha lot of movement to provide a clearer picture.If you enable✎ Motion Plus, noise may appear onthe screen. If this occurs, set Motion Plus to Off.The info screen on your TV displays the resolution✎ and frequency of the incoming video signal (60Hz).This displayed frequency is not what the TV isdisplaying by using the Auto Motion Plus function.Blur Reduction: Adjusts the blur reduction level fromvideo sources.Judder Reduction: Adjusts the judder reduction levelfrom video sources when playing films.Reset: Reset the custom settings.Auto Protection Time (2 hours/4 hours/8 hours/10■hours/ Off) : If the same image remains on the screen,Auto Screen Burn Protector will work.Picture Reset (OK / Cancel)Resets your current picture mode to its default settings.Picture OptionsColour Tone : Normal ►Size : Auto WideScreen Mode : 16:9Digital Noise Filter : AutoMPEG Nosie Filter : AutoHDMI Black Level : NormalFilm Mode : Off▼U Move E Enter R Return