Samsung LE32C650 User Manual

Also see for LE32C650: User manual User manual User manual User manual User manual

Contents

25English04 Advanced FeaturesConnecting Wireless Network¦To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustrationbelow.Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsungrecommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.NOTE✎ You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wirelessx network.Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by selectx retailers, Ecommerce sites and Samsungparts.com.To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supportsx DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharerx is currently being used by another device nearby, this will result in interference and communication failure.If you apply a security system other than the systems listed below, it will not work with the TV.xIf Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP orx TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Ficertification specifications.If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Buttonx Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key ineither mode.Keep the Samsung Wireless LAN Adaptor at a distance from the TV. If you watch the TV with the adaptor connectedx nearby, images may appear corrupted for some channels.If your router, modem, or device isn’t certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”xConnection Methodsx : You can setup the wireless network connection on six ways.Samsung Auto Configuration–PBC (WPS)–Auto Setup (Using the Auto Network Search function)–Manual Setup–SWL (Samsung Wireless Link)–Ad-Hoc–All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are notx supported.orThe LAN Port onthe WallLAN CableWireless IP sharerSamsung WirelessLAN AdapterTV Side PanelTo use the SWL(Samsung Wireless Link) function, connect to the✎ USB 1 (HDD) port.