Samsung LN19A451 User Manual

Also see for LN19A450 - 19" LCD TV: User manual User manual User guide User manual

OperationTurning the "IV On and OffPress the POWERd) button on the remote control.You can also use the POWERd) button on the TV.l/ POWERSOURCEPlug & Play FeatureWhen the TV is initiallypowered on, basic settings proceed automatically andsubsequently.> The Screen Saver is activated if there is no remote control key input for longer than 1minute while "Plug & Play" is running.> The Screen Saver is activated if there is no operating signal for longer than 15minutes.1. Press the POWER button on the remote control.The message "Menu Language, Store Demo, Channels and Time will be set." isdisplayed.Press the ENTER _ button, then "Select the language of the OSD" menuis automatically displayed.2_3_Press the A or T button to select language, then press the ENTER 13_button.The message "Select 'Home Use' when installing this TV in your home." isdisplayed.Press the 4 or I_ button to select "Store Demo" or "Home Use", thenpress the ENTER _ button.The message "Select the antennas to memorize." is displayed.> We recommend setting the TV to "Home Use" mode for the best picture in yourhome environment.> "Store Demo" mode is only intended for use in retail environments.> If the unit is accidentally set to "Store Demo" mode and you want to return to"Home Use" (Standard): Press the Volume button on the TV. When the volumeOSD is displayed, press and hold the MENU button on the TV for 5 seconds.4_ Press the A or T button to memorize the channels of the selected connection.Press the ENTER G_' button to select "Start".>Air: "Air" antenna signal.Cable: "Cable" antenna signal.Auto: "Air" and "Cable" antenna signals.> In Cable mode, you can select the correct signal source among STD, HRC, andIRC by pressing the A T, _ or 1_ button, then press the ENTER C,-' button.If you have Digital cable, select the cable system signal source for both Analogand Digital. Contact your local cable company to identify the type of cablesystem that exists in your particular area.5_ The TV will begin memorizing all of the available channels.>--To stop the search before it has finished, press the ENTER _ button with "Stop"selected.>After all the available channels are stored, it starts to remove scrambledchannels (see page 28). The Auto program menu then reappears.Press the ENTER _ button when channel memorization is complete. Themessage "Set the Clock Mode." is displayed.