Using the V-ChipThe V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN(personal ID number) before any of the V-Chip restrictions are set up or changed.>. "V-Chip" function is not available in HDMI, component or PC mode.>. The Screen Saver is activated if there is no remote control key input for longer than 1 minute while setting up the "V-Chip".U.8.A OnlyThis product is covered by the following U.S.patents : US4,930,158,US4,930,160SettincjUp_U Your Personal ID Number PL_L_t, Press the MENU button to display the menu.Press the A or T button to select "Setup", then press the ENTER 1:_ button.2, Press the A or T button to select "V-Chip", then press the ENTER _ button.The message "Enter PIN" will appear. Enter your 4 digit PIN number.>-The default PIN number of a new TV set is "0-0-0-0".3= The "V-Chip" screen will appear.Press the A or T button to select "Change PIN", then press the ENTER _ button.The Change PIN screen will appear. Choose any 4 digits for your PIN and enterthem. As soon as the 4 digits are entered, the "Confirm Password" screen appears.Re-enter the same 4 digits. When the Confirm screen disappears, your PIN hasbeen memorized.Press the EXIT button to exit.>. If you forget the PIN, press the remote-control buttons in the followingsequence, which resets the pin to 0-0-0-0 : Power Off. _ Mute _ 8 _ 24 _ Power On.