English - 1Adjusting the VolumeUsing the Volume Buttons1. Press the VOL or VOL button to increase or decrease the volume.Using the MUTE buttonAt any time, you can cut off the sound using the MUTE button.1. Press MUTE button and the sound cuts off." " is displayed on the screen.2. To turn mute off, press the MUTE button again or simply press theVOL or VOL button.Viewing the Display1. Press the INFO button on the remote control.The TV will display the channel, the type of sound,and the status of certain picture and sound settings.Press the INFO button once more or wait approximately 10 seconds and thedisplay disappears automatically.➣The display identifies the current channel and the status of certain audio-video settings.Air 7MonoPicture Mode : StandardSound Mode : CustomMTS : StereoV-Chip : OffCaption : Off : 4 pmUsing the ButtonThe button is used to select stations that broadcast a digital signal.1. For example, for Channel 7-1, press 7, then , then 1.HD indicates the TV is receiving a Digital High Definition signal. SD indicatesthe TV is receiving a Standard Definition signal.For quick channel change, press the number buttons, then press the ENTERbutton.Using the PRE-CH Button to select the Previous Channel1. Press the PRE-CH button.The TV will switch to the last channel viewed.To quickly switch between two channels that are far apart, tune to onechannel, then use the number button to select the second channel. Thenuse the PRE-CH button to quickly alternate between them.Viewing the Menus1. With the power on, press the MENU button.The main menu appears on the screen. The menu’s left side has icons:Picture, Sound, Channel, Setup, Input.2. Press the ▲ or ▼ button to select one of the icons.Then press the ENTER button to access the icon’s sub-menu.3. Press the ExIT button to exit.The on-screen menus disappear from the screen after about one minute.Move Enter ExitMode : Standard ►Backlight 7Contrast Brightness 4Sharpness 0Color 0Tint G 0 R 0▼ MorePictureTV
