Samsung LN22C500B2F User Manual

Contents

17English03 Basic Featuresspeaker select(External speaker / TV speaker)A sound echo may occur due to a difference in decodingspeed between the main speaker and the audio receiver. Inthis case, set the TV to External speaker.When✎ speaker select is set to External speaker, thevolume and MUTE buttons will not operate and thesound settings will be limited.When✎ speaker select is set to External speaker, youshould use these settings.TV speaker: Off, External speaker: OnxWhen✎ speaker select is set to TV speaker, youshould use these settings.TV speaker: On, External speaker: OnxIf there is no video signal, both speakers will be mute.✎sPDIF OutputSPDIF (Sony Philips Digital Interface) is used to provide digitalsound, reducing interference going to speakers and variousdigital devices such as an A/V Receiver/Home theater.Audio Format■ : During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM or Dolby Digital.By connecting to 5.1ch speakers in a dolby✎ digital setup, maximize your interactive 3D soundexperience.Audio Delay■ : Correct audio-video sync problems, whenwatching TV or video, and when listening to digital audiooutput using an external device such as an AV receiver(0ms ~ 250ms).sound ResetReset all sound settings to the factory defaults.Setup Menusetting the Time¦MEnUO m → setup → Time → EnTERETimeThe current time will appear every time you press the✎ InFO button.Clock■ : Setting the clock is for using various timerfeatures of the TV.If you disconnect the power cord, you have to set✎ the clock again.Clock Mode: Set up the current time manually orautomatically.Auto– : Set the current time automatically using thetime from a digital channel.The antenna must be connected in order to set✎ the time automatically.Manual– : Set the current time manually.Depending on the broadcast station and signal,✎ the auto time set up may not be correct. In thiscase, set the time manually.Clock set: Set the Month, Day, Year, hour, Minuteand am/pm.Available only when✎ Clock Mode is set toManual.You can set the month, day, year, hour and minute✎ directly by pressing the number buttons on theremote control.DsT (Off / On): Switches the DST(Daylight Saving Time)function on or off.This function is only available when the✎ ClockMode is set to Auto.Time Zone: Select your time zone.This function is only available when the✎ ClockMode is set to Auto.Using the sleep Timer¦MEnUO m → setup → Time → sleep Timer →EnTEREsleep Timer■ t : Automatically shuts off the TVafter a preset period of time. (30, 60, 90, 120, 150 and180 minutes).To cancel the✎ sleep Timer, select Off.setting the On/Off Time¦MEnUO m → setup → Time → Timer 1 →EnTERETimer 1 / Timer 2 / Timer 3■ : Three different on / offtimer settings can be made. You must set the clock first.Timer 1L Move U Adjust E Enter R ReturnOn TimeOff TimeVolume Source Antenna ChannelRepeat Sun Mon Tue Wed Thu Fri SatInactivate 12 00 amInactivate 12 00 am10 TV Air 3Once▲▼