English - 27Viewing Picture-in-PictureYou can use the PIP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external video source.(See page 33 to select the PIP picture sound.) This product has one built-in tuner, which does not allow PIP to function inthe same mode. Please see ‘PIP Settings’ below for details.While V-Chip (See page 49) is in operation, the PIP function cannot be used.Activating Picture-in-Picture1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.2. Press the ENTER button again.Press the ▲ or ▼ button to select “On”, then press the ENTER button.If you turn the TV off while watching in PIP mode and turn it on again, thePIP window will disappear.You can view Analog TV broadcasts on the PIP screen (sub-picture) whenthe main picture is from an external device connected to HDMI 1,HDMI/DVI 2, HDMI 3, Component1, 2 or PC.PIP SettingsMain picture Sub pictureComponent 1, 2HDMI 1, HDMI/DVI 2, HDMI 3PCAnalog TV broadcasts onlyChanging the Size of the PIP Window3. Press the ▲ or ▼ button to select “Size”, then press the ENTER button.Press the ▲ or ▼ button to select the required option, then press the ENTERbutton.You may notice that the picture in the PIP window becomes slightlyunnatural when you use the main screen to view a game or karaoke.Changing the Position of the PIP Window4. Press the ▲ or ▼ button to select “Position”, then press the ENTERbutton.Press the ▲ or ▼ button to select the required option, then press the ENTERbutton.In Double Window ( ) and Double Wide ( ) modes, “Position”cannot be selected.➣➣➣➣➣➣SetupEntertainment : OffEnergy Saving : OffPIP ►SW UpgradePIPPIP : OffSize :Position :Air/Cable : AirChannel : Air 11ReturnEnterMoveOffOnPIPPIP : OnSize :Position :Air/Cable : AirChannel : Air 11ReturnEnterMovePIPPIP : OnSize :Position :Air/Cable : AirChannel : Air 11ReturnEnterMove
