Samsung LN32C550 User Manual

Also see for LN37C550: User manual User manual Quick setup guide User manual User manual

Contents

16 EnglishBasic FeaturesAfter selectingx screen Fit in HDMI (1080i/1080p) orComponent (1080i/1080p) mode, you may need tocenter the picture:1. Press the ◄ or ► button to select Position.2. Press the EnTERE button.3. Press the ▲, ▼, ◄ or ► button to move thepicture.4. Press the EnTERE button.5. Press the ◄ or ► button to select Reset.6. Press the EnTERE button.HD (High Definition): 16:9 - 1080i/1080p (1920x1080),x 720p (1280x720)Settings can be adjusted and stored for eachx external device you have connected to an input onthe TV.Input source Picture sizeATV, AV,Component (480i, 480p)16:9, Zoom1,Zoom2, 4:3DTV(1080i),Component (1080i, 1080p),HDMI (720p, 1080i, 1080p)16:9, 4:3, Wide Fit,screen FitPC 16:9, 4:3Digital noise Filter (Off / low / Medium / high / Auto■/ Auto Visualization): If the broadcast signal receivedby your TV is weak, you can activate the Digital noiseFilter feature to reduce any static and ghosting that mayappear on the screen.When the signal is weak, try other options until the✎ best picture is displayed.Auto Visualization: When changing analog channels,displays signal strength.Only available for analog channels.✎When bar is green, you are receiving the best✎ possible signal.MPEg noise Filter (Off / low / Medium / high /■Auto): Reduces MPEG noise to provide an improvedpicture quality.Disabled under PC mode.✎hDMI Black level (normal / low)■ : Selects the blacklevel on the screen to adjust the screen depth.Available only in HDMI mode (RGB signals).✎Film Mode (Off / Auto1 / Auto2)■ : Sets the TV toautomatically sense and process film signals from allsources and adjusts the picture for optimum quality.Available in TV, AV, COMPONENT (480i / 1080i)✎ and HDMI (480i / 1080i).Auto Protection Time (2 hours / 4 hours / 8 hours■/ 10 hours / Off): If the screen remains idle with a stillimage for a certain period of time defined by the user,the screen saver is activated to prevent the formation ofghost images on the screen.Picture Reset (OK / Cancel)Resets your current picture mode to its default settings.Sound MenuChanging the Preset sound Mode¦MEnUO m → sound → Mode → EnTEREMode tstandard■ : Selects the normal soundmode.Music■ : Emphasizes music over voices.Movie■ : Provides the best sound formovies.Clear Voice■ : Emphasizes voices overother sounds.Amplify■ : Increase the intensity of high-frequency soundto allow a better listening experience for the hearingimpaired.Adjusting sound settings¦MEnUO m → sound → Equalizer → EnTEREEqualizerAdjusts the sound mode.Balance l/R■ : Adjusts the balance between the right andleft speaker.100hz / 300hz / 1Khz / 3Khz / 10Khz■ (BandwidthAdjustment): Adjusts the level of specific bandwidthfrequencies.Reset■ : Resets the equalizer to its default settings.sound settings¦MEnUO m → sound → EnTEREVirtual surround (Off / On)(standard sound mode only)This function provides a virtual 5.1 channel surround soundexperience through a pair of speakers or headphones usingHRTF (Head Related Transfer Function) technology.If✎ speaker select is set to External speaker, Virtualsurround is disabled.FAV.CHS.MODESLEEP