Samsung LN32C550J1FXZA User Manual

Also see for LN37C550: User manual User manual Quick setup guide User manual User manual

15English03 Basic Features4. Navigate to the “Settings” tab on the display dialog-box.The correct size setting (resolution)y[Optimum: 1920 X 1080 pixels]If a vertical-frequency option exists on your displayysettings dialog box, the correct value is ‘60’ or ‘60 Hz’.Otherwise, just click ‘OK’ and exit the dialog box.Changing the Picture Options¦Advanced settingsMEnUO m → Picture → Advanced settings →EnTERE(available in standard / Movie mode)Compared to previous models, new Samsung TVs havemore precise pictures.In PC mode, you can only make changes to✎ DynamicContrast, gamma and White Balance.Bla■ ck Tone (Off / Dark / Darker / Darkest): Select theblack level to adjust the screen depth.Dynamic Contrast (Off / low / Medium / high)■ :Adjust the screen contrast.shadow Detail■ : Increase the brightness of dark images.Disabled under PC mode.✎g■ amma: Adjust the primary color intensity.RgB Only Mode (Off / Red / green / Blue)■ : Displaysthe Red, green and Blue color for making fineadjustments to the hue and saturation.Color space (Auto / native)■ : Adjust the range of colorsavailable to create the image.White Balance■ : Adjust the color temperature for a morenatural picture.R-Offset / g-Offset / B-Offset: Adjust each color's(red, green, blue) darkness.R-gain / g-gain / B-gain : Adjust each color's (red,green, blue) brightness.Reset: Resets the White Balance to it's defaultsettings.Flesh Tone■ : Emphasize pink "flesh tone".Edge Enhancement (Off / On)■ : Emphasize objectboundaries.Picture OptionsMEnUO m → Picture → Picture Options →EnTEREIn PC mode, you can only make changes to the✎ ColorTone, size and Digital noise Filter.Color Tone (Cool / normal / Warm1 / Warm2)■Warm1✎ or Warm2 will be deactivated when thepicture mode is Dynamic.Settings can be adjusted and stored for each✎ external device connected to an input on the TV.size■ : Your cable box/satellite receivermay have its own set of screen sizes aswell. However, we highly recommendyou use 16:9 mode most of the time.16:9: Sets the picture to 16:9 wide mode.Zoom1: Use for moderate magnification.Zoom2: Use for a stronger magnification.Wide Fit: Enlarges the aspect ratio of the picture to fitthe entire screen.4:3: Sets the picture to basic (4:3) mode.Do not watch in 4:3 format for a long time. Traces✎ of borders displayed on the left, right and centerof the screen may cause image retention (screenburn) which are not covered by the warranty.screen Fit: Displays the full image without any cut-offwhen HDMI (720p / 1080i / 1080p) or Component(1080i / 1080p) signals are inputted.nOTE✎After selectingx Zoom1, Zoom2 or Wide Fit:1. Press the ► button to select Position.2. Press the EnTERE button.3. Press the ▲ or ▼ button to move the picture upor down.4. Press the EnTERE button.5. Press the ► button to select Reset.6. Press the EnTERE button to reset the pictureto its default position.Advanced SettingsBlack Tone : Off ►Dynamic Contrast : MediumShadow Detail : 0Gamma : 0RGB Only Mode : OffColor Space : NativeWhite Balance▼U Move E Enter R ReturnPicture OptionsColor Tone : Normal ►Size : 16:9Digital Noise Filter : AutoMPEG Noise Filter : AutoHDMI Black Level : NormalFilm Mode : OffAuto Protection Time : 2 hoursU Move E Enter R ReturnPPOWERFAV.CHCHLISTMEDIA.PP.MODES.MODEP.SIZECCMTSINFOSLEEPBN68-02604A_Eng.indb 15 2010-02-10 �� 8:19:18