English - Problem Possible SolutionThe picture appears distorted in thecorner of the screen.If Screen Fit is selected with some external devices, the picture may appear distorted inthe corner of the screen. This symptom is caused by the external devices, not TV.The ‘Resets all settings to thedefault values.’ message appears.This appears when you press and hold the ExIT button for a while. The product settingsare reset to the factory defaults.This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of theproduct.Installing the Stand1. Attach your LCD TV to the stand.Two or more people should carry the TV.Make sure to distinguish between the front and back of the stand when attaching it.To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper leftof right sides of the TV.2. Fasten two screws at position 1 and then fasten two screws at position 2.Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to oneside.Disconnecting the Stand1. Remove four screws from the back of the TV.2. Separate the stand from the TV.Two or more people should carry the TV.. Cover the bottom hole with the cover.N¦NNNN¦N
