Viewing Closed Captions (On-Screen Text Messages) -AnalogThe Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an externaldevice to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)1. Press the MENU button to display the menu.Press the A or T button to select "Setup", then press the ENTER C_ button.2, Press the A or T button to select "Caption", then press the ENTER C#button.3, Press the ENTER C_ button to select "Caption". Press the A or T button toselect "On", then press the ENTER C_ button.1 Press the A or T button to select "Caption Mode", then press the ENTER C_button. Press the A or T button to select submenu (Default, CC1-CC4 orTextl-Text4) you want, the press the ENTER C*_ button.Press the EXIT button to exit.- The default is "CC 1".- CCI: The Primary Synchronous Caption Service. These are captionsin the primary language that must be in sync with the sound, preferablymatched to a specific frame.• CC2: The Special Non-Synchronous Use Captions. This channelcarries data that is intended to augment information carried in theprogram.- CC3: Secondary Synchronous Caption Service. Alternate program-related caption data. typically second language captions.• CC4: Special Non-Synchronous Use Captions. Similar to CC2.• Text1: First Text Service. This may be various non-program relateddata.- Text2: Second Text Service. Additional data, usually not programrelated.- Text3/Text4: Third and Fourth Text Services. These data channelsshould be used only if Text1 and Text2 are not sufficient.>- The Caption feature doesn't work in Component, HDMI or PC modes.>- The availability of captions depends on the program being broadcast.1_ Press the CC button on the remote control to turn the Caption "On" or "Off".
