Samsung M100 User Manual

Also see for M100: Quick start guide Quick start guide

Contents

Samsung M100 User Manual Manual pdf 27 page image

26Setting up the recording function using the camera buttonsThe recording mode function can be set up by using the camera buttons.POWER buttonUsed for turning the camera’s power on/ off.If there is no operation during the specifiedtime, the camera’s power will be turned offautomatically to save battery life.Refer to page 74 for more information aboutthe auto power off function.SHUTTER buttonUsed for taking an image or recording voice in the RECORDING mode.In MOVIE modePressing the shutter button down fullystarts the process for recording a movie.Press the shutter button once and themovie is recorded for as long as theavailable recording time in the memoryallows. If you wish to stop recording,press the shutter button again.In STILL IMAGE modePressing the shutter button downhalfway activates the autofocus and checks the condition of the flash.Pressing the shutter button down fully takes and stores the image. If youselect voice memo recording, the recording will start after the camera hasfinished storing the image data for 10 seconds.xxIf the menu is not displayed, this button works asthe OPTICAL ZOOM or DIGITAL ZOOM button.This camera has a 3X optical zoom and a 3Xdigital zoom function.Using both will offer a total zoom ratio of 9X.TELE ZoomOptical zoom TELE : Pressing the ZOOM T button. This will zoom into thesubject i.e. the subject will appear nearer.Digital zoom TELE : When the maximum (3X) optical zoom is selected,pressing the ZOOM T button activates the digitalzoom software. Releasing ZOOM T button stopsthe digital zooming at the required setting. Once themaximum digital zoom (3X) is achieved, pressing theZOOM T button will have no effect.Pressingthe ZOOMT buttonPressingthe ZOOMT button[WIDE zoom] [TELE zoom] [Digital zoom 3.0X]ZOOM W / T button