41Drive modeYou can select continuous shot, and AEB (Auto Exposure Bracketing).[Single] () : Take one picture only.[Continuous] () : Images will be takencontinuously untilthe shutter button isreleased.[AEB] () : Take three picturesin a series in differentexposures: standardexposure (0.0EV), short exposure (-1/3EV) andover exposure (+1/3EV).Use this function when you cannot determine theexposure value of subject.[Motion Capture] () : This takes 6 shots per second, and for max 5seconds, when the shutter is pressed and helddown. The maximum number of shots is 30 andthe image size is fixed as VGA.High resolution and picture quality increases file saving time, whichincreases stand-by time.If the [Continuous], [AEB] or [Motion Capture] sub menu isselected, the flash will be off automatically.If less than 3 pictures are available in the memory, the [AEB]shooting is not available.It is best to use a tripod for the [AEB] shooting as the time to saveeach image file is longer and blurring caused by camera shakemay occur.If less than 30 pictures are available in the memory, the[Motion Capture] shooting is not available.xxxxxSetting up the recording function using the camera buttonsISOYou can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of acamera is rated by ISO numbers.[Auto] () : The camera’s sensitivity isautomatically changed byvariables such as lighting valueor subject brightness.[ISO 80, 100, 200, 400, 800, 1600] ( ) :You can increase the shutter speed while the same amount of light ispresent, by increasing the ISO sensitivity. However, the image may besaturated in high luminance.The higher the ISO value, the higher the camera’s sensitivity to lightand therefore the greater its capacity to take pictures in dark conditions.However, the noise level in the image will increase as the ISO valueincreases, making the image appear coarse.DRIVESingleISOAuto