1438 System8 System8.1 Multi ControlMENU System Multi Control ENTERAssign an individual ID to your product.8.1.1 Configuring settings for Multi Controlz MDC ConnectionSelect a method to connect to MDC to receive the MDC signal. RS232C MDCCommunicate with MDC via the RS232C-stereo cable. RJ45 MDCCommunicate with MDC via the RJ45 cable.z ID SetupAssign an ID to a set. (Range: 0~99)Press or to select a number, and press [ ].z ID InputEnter the ID number of the product connected to the input cable for input signal reception.Enter the number you want using the number buttons on the remote control.Refer to page 71 for details about the MDC menu.O m
