82Using MDC33 Using MDC3.3.8 MenusYou can power on or off a selected device or change the input source or volume of the device.Choose display devices from the list of sets, and select the Home tab.HomeSelect an item and change the corresponding setting.Powerz On: Power on a selected display.z Off: Power off a selected display.Inputz Input Source : Change the input source. Input sources available can vary depending on the Display Device Models. The input source can be changed only for displays that are turned on.z Channel : Change the channel. The TV channel can be changed by using the up/down arrow keys. The channel can be changed only when the input source is TV. Only registered channels can be selected.VolumeThe volume can be changed or the sound can be muted only for displays that are turned on.Volume The volume can be adjusted using the slider bar in the range of 0 to 100.Adjust the volume of a selected display.Mute Enable or disable Mute for a selected display.Mute will automatically be disabled if Volume is adjusted when Mute is on.12
