Samsung MH080FXEA4B Installation Manual

E-19ENGLISHC OMPLETING THE INSTALLATIONableerge oftieure it.Testing the drainagePrepare a little water about 5 liter.1 Open the cover of water supply intake by turning and pulling the cover.(MHFEEA/NJLHXEA)2 Pour water into the the indoor unit as shown in figure.Note  If you do not pour water inside the water supply intake,wateray spill from the indoor unit.3 Confirm that the water flows out through the drain hose.4 Reassemble the cover of water supply intake.(MHFEEA/NJLHXEA)CAUTIONDo not apply force to the piping on the unit side whenconnecting the drain hose. The hose should not be allowedto hang loose from its connection to the unit. Fasten thehose to a wall, frame or other support as close to the unit aspossible.Upward gradientCeilingSupport piecesCeilingWhen not installing the drain pumpDo not give the hose upward gradient after the connectionport. This will cause water to flow backwards when the unitis stopped, resulting in water leaks.Water supply intakeMHFEEA/NJLHXEAMHFUEAWhen installing the drain pumpWhen installing a flexible hose, the difference ofpivot of a drain hose port and a drain hose mustbe within 20mm. If the difference of each pivot ismore than 20mm, or a flexible hose is bentsteeply, a flexible hose may leak.20mm or more550mm or lessCeilingFlexible hose1/100 or moreFJM_IM_DB98-31792_E_7.14.10.indd 19 2010-7-14 13:36:38