Samsung MH18AP1-09 Installation Manual

Contents

E-9ENGLISHFixing the Installation PlateBefore fixing the installation plate to a wall or window frame, youmust determine the position of the 65 mm hole through which thecable, piping and hose pass to connect the indoor unit up to theoutdoor unit. When facing the air conditioner in position on the wall,the piping and cable can be connected from the: Right Left Rear (right or left)1 Determine the position of the pipe and drain hose hole using the rightfigure and drill the hole with an inner diameter of 65 mm so that it slantsslightly downwards.2 If you are fixing the indoor unit to a... Then follow Steps...Wall 3.Window frame 4 to 6.3 Fix the installation plate to the wall in a manner appropriate to the weightof the indoor unit.➢ If you are mounting the plate on a concrete wall with anchorbolts, the anchor bolts must not project by more than 20 mm.4 Determine the positions of the wooden uprights to be attached to thewindow frame.5 Attach the wooden uprights to the window frame in a manner appropriateto the weight of the indoor unit.6 Using tapped screws, attach the installation plate to the wooden uprights,as illustrated in the last figure opposite.INSTALLING THE INDOOR U NIT19100 15830mmInstallation platePipe hole(Ø65mm)(Unit : mm)✴✴07/09✴✴4590 165(Unit : mm)✴✴12✴✴