E-2Safety PrecautionsXRead carefully this installation manual beforeinstallation and check if the LonWorks Gateway isinstalled correctly after installation.XDo not attempt to install or repair this LonWorks Gatewayby yourself.XThis LonWorks Gateway contains no user-serviceableparts. Always consult authorized service personnel forrepairs.XWhen moving, consult authorized service personnel fordisconnection and installation of the LonWorks Gateway.XEnsure that the wall is strong enough to support theweight of the LonWorks Gateway.XMust install the LonWorks Gateway with rated powersupply.XThe LonWorks Gateway must be installed according tothe national electrical rules by an installation specialist.XIf you wish to uninstall the LonWorks Gateway, consult anauthorized installation center.WARNINGCAUTION XDo not use inflammable gases near the LonWorksGateway.XDo not install the LonWorks Gateway in a location whereit will come into contact with combustible gases,machine oil, sulphide gas, etc.XAvoid locations where acid/alkali solution or specialspray is used.XChoose a location that is dry and sunny, but not exposedto direct sunlight. Suitable temperature is between0°C(32°F) and 39°C(102.2°F).XDo not spill water into the LonWorks Gateway.XDo not apply tensile strength to the cable to avoid cabledamage.XDo not press the buttons with a sharp object.XDo not connect the power cable to the control terminal.XIf the LonWorks Gateway is installed in a hospital orother special places, it should not affect other electronicdevices.This installation manual describes how to install the LonWorks Gateway. For installationof other optional accessories, refer to the appropriate installation manual.K LonWorks
, LON
and Lontalk
are registered trademarks ofEchelon Corporation.uhzhtptTiX_us~Gn ptluWZ^YWhOXPUGGGY YWXZTW[TY\GGG㝘㤸GXWaX]aX_