11ENGLISHInitializing user dataf If you want to initialize all the user data to set the Wi-Fi kit as factory default status, press and hold the button (SW3)inside the Wi-Fi kit for 5 seconds. After releasing the button, all the lamps on the Wi-Fi kit are turned on and all the userdata is deleted.Updating the Wi-Fi kit by SD card1. Make update directory in the SD card. Copy the latest S/W image and paste it into the update directory of the SD card.2. Insert the SD card into the SD card slot which is located inside the Wi-Fi kit.3. Press the Reset button on the side of the Wi-Fi kit.4. The lamp inside the Wi-Fi kit is turned on during the update.f When the update is completed correctly, the lamp is turned off.f When the update is completed incorrectly, the lamp blinks.5. When the update fails, the Wi-Fi kit returns to the previous version when it restarts. Retry the update but if it still does notwork, take following measures.f Check the file for an error: change the update image (file)f Check the SD file for an error: change the SD cardf Check the PBA for an error: change the PBA.mqtG~pmpGrp{TuhW\^_^hTWWluUGGGXX YWX\TXWTYZGGG㝘䟸G[aYWaX`

Safety precautions

Check before installing Wi-Fi kit

How to install Wi-Fi kit

Checking the Wi-Fi kit

Initializing user data

Setting the network

Starting Samsung Smart Home App

Running the Samsung Smart Home App

Registering the product

Description of screens and main functions

Starting System Air conditioner App

Indoor unit/ group list screen

Control screen

Setting the group

Editing the indoor unit list

Schedule

Energy monitor

Settings

Updating the Wi-Fi kit

Troubleshooting

Open Source Announcement

Samsung MIM-H03U User & Installation Manual

MIM-H03U