2. 13Printer SetupSoftware Utilities InstallationInstalling the USB Port Driver (Windows 98)The USB port driver must be installed in order to print to the ML-6100 viaa USB connection. Currently, USB printing is only available throughWindows 98.1. Insert the ML-6100 CD-ROM into your CD-ROM drive. If Windowsautomatically runs the CD-ROM, skip to Step 3.2. Select Run from the Start menu. Type d:\setup.exe on the commandline (where “d” is your CD-ROM drive letter), then click OK.3. Select the appropriate language, then select USB Port Driver.Installing the RCP and SM (Windows)The RCP (Remote Control Panel) and the SM (Status Monitor) softwareare Windows-based programs that allow the user to set default printervalues as well as monitor the status of the printer.These two utilities can be used when the printer is connected via theparallel and USB(Windows 98 only) interface.1. Insert the ML-6100 CD-ROM into your CD-ROM drive. If Windowsautomatically runs the CD-ROM, skip to Step 3.2. For Windows 95/98/NT 4.0:Select Run from the Start menu. Type d:\setup.exe on the commandline (where “d” is your CD-ROM drive letter), then click OK.For Windows 3.1x:Open the Program Manager and select Run from the File menu.Type d:\setup16.exe on the command line (where “d” is yourCD-ROM drive letter), then click OK.3. Select the appropriate language.4. For Windows 3.1x, 95 and 98, select RCP and SM.For Windows NT 4.0, select RCP.
