USING YOUR PRINTER ON A NETWORK E.9E11 Press the Enter button ( ) to access the IP Addressmenu.IP address consists of 4 bytes.12 Press the scroll button ( or ) to enter a numberbetween 0 and 255 and press the Enter button ( ).13 Repeat Step 12 to complete the address from the 1st byteto the 4th byte.14 To select other parameters, such as Subnet Mask orGateway, press the Upper Level button ( ), then use thescroll button ( or ). Press the Enter button ( ).15 Repeat steps 12 and 13 to configure the other TCP/IPparameters.Dynamic Addressing (BOOTP/DHCP)To assign the TCP/IP address automatically by the server, takethe following steps:1 Press the Menu button ( ) until you see “Network” on thebottom line of the display. Press the Enter button ( ) toaccess the menu.2 Press the Enter button ( ) when “Config Network”displays on the bottom line.3 Press the scroll button ( or ) to display “Yes” andpress the Enter button ( ).4 press the Upper Level button ( ), then use the scrollbutton ( ).5 Press the Enter button ( ) when “Config TCP” displays.6 Press the scroll button ( or ) to display “Yes” andpress the Enter button ( ).Enter a number between 0and 255 for each byte.
