272. Using a network-connected machineIPv6 configurationIPv6 is supported properly only in Windows Vista or higher.If the IPv6 network seems to not be working, set all thenetwork setting to the factory defaults and try again usingClear Setting.In the IPv6 network environment, follow the next procedure to usethe IPv6 address. 10From the control panel1 Connect your machine to the network with a network cable.2 Turn on the machine.3 Print a Network Configuration Report that will check IPv6addresses (see "Printing a network configuration report" onpage 13).4 Select Start > Control Panel > Printers and Faxes.5 Click Add a printer in the left pane of the Printers and Faxeswindows.6 Click Add a local printer in the Add Printer windows.7 The Add Printer Wizard window appears. Follow theinstructions in the window.If the machine does not work in the network environment,activate IPv6. Refer to the next section followed by.Activating IPv61 Press the (Menu) button on the control panel.2 Press Network > TCP/IP (IPv6) > IPv6 Activate.3 Select On and press OK.4 Turn the machine off and turn it on again.5 Reinstall your printer driver.
