Samsung ML-2950ND User Manual

Also see for ML-295 Series: User guide User manual

Contents

Glossary 127BOOTPBootstrap Protocol. A network protocol used by a network client toobtain its IP address automatically. This is usually done in thebootstrap process of computers or operating systems running onthem. The BOOTP servers assign the IP address from a pool ofaddresses to each client. BOOTP enables 'diskless workstation'computers to obtain an IP address prior to loading any advancedoperating system.CCDCharge Coupled Device (CCD) is a hardware which enables the scanjob. CCD Locking mechanism is also used to hold the CCD module toprevent any damage when you move the machine.CollationCollation is a process of printing a multiple-copy job in sets. Whencollation is selected, the device prints an entire set before printingadditional copies.Control PanelA control panel is a flat, typically vertical, area where control ormonitoring instruments are displayed. They are typically found infront of the machine.CoverageIt is the printing term used for a toner usage measurement onprinting. For example, 5% coverage means that an A4 sided paperhas about 5% image or text on it. So, if the paper or original hascomplicated images or lots of text on it, the coverage will be higherand at the same time, a toner usage will be as much as the coverage.CSVComma Separated Values (CSV). A type of file format, CSV is used toexchange data between disparate applications. The file format, as itis used in Microsoft Excel, has become a de facto standardthroughout the industry, even among non-Microsoft platforms.DADFA Duplex Automatic Document Feeder (DADF) is a scanning unit thatwill automatically feed and turn over an original sheet of paper sothat the machine can scan on both sides of the paper.DefaultThe value or setting that is in effect when taking a printer out of itsbox state, reset, or initialized.