Installing Printer Options9.83 Find the location of the connector and the optional Tray 2positioners.4 Place the printer over the optional Tray 2, aligning the feeton the printer with the positioners on the optional Tray 2.CAUTION: The printer weights 23kg including the tonercartridge and the tray. Use safe lifting and handlingtechniques. If you need to move the printer, it should bemoved by two people. Use the lifting handles as shown inpage 1.3. Back injury could result if a single person attemptsto lift the printer.Lifting handlesare located atthe lower edgeof both sides ofthe printer.5 Plug the optional Tray 2 cable into the optional Tray 2 cableconnector on the back of the printer.6 Load paper in the optional Tray 2. The instructions forloading paper in the optional Tray 2 are same as forloading in the Tray 1. See page 2.4.7 Reconnect the power cord and cables and then turn theprinter on.CAUTION: Do not remove the Tray 1 from the printer while youare printing using the optional Tray 2. If you do this, a paper jammay occur. Use the optional Tray 2 with the Tray 1.After installing optional Tray 2, you must set the tray asinstalled in the printer properties window.8 Click the Windows Start menu.9 For Windows 9x/Me/NT4.0/2000, select Settings and thenPrinters.For Windows XP/2003, select Printers and Faxes.10 Select the Samsung ML-3560 Series PCL 6 printer iconor Samsung ML-3560 Series PS printer icon.11 Right-click on the printer icon and select Properties.12 In PCL 6 Properties, click the Printer. Then select Tray 2from the Optional Tray drop-down list.In PS Properties, click the Device Option tab and selectInstalled from the Tray 2 drop-down list.13 Click OK.
