1.5 <Introduction>Selecting a locationSelect a level, stable place with adequate space for air circulation. Allowextra space for opening covers and trays.The area should be well-ventilated and away from direct sunlight orsources of heat, cold, and humidity. Do not set the printer close to theedge of your desk or table.Clearance spaceFront: 482.6 mm (enoughspace so that trays can beopened or removed)Back: 320 mm (enough spaceto allow opening of the rearcover or the duplex unit)Right: 100 mm (enough spaceto allow opening of the controlboard cover)Left: 100 mm (enough spacefor ventilation)Note• When you move the printer, do not tilt or turn it upside down,otherwise the inside of the printer may be contaminated bytoner, which can cause damage to the printer or bad printingquality.
