9.2 <Troubleshooting>In the paper feed areaIn the tray 11 Pull the tray 1 open.2 Remove the jammed paper by gently pulling it straight out. Makesure that all of the paper is properly aligned in the tray 1.If the paper does not move when you pull, or if you do not see thepaper in this area, check the fuser area around the toner cartridge.See page 9.3.3 Insert the tray 1 into the printer until it snaps into place. Printingautomatically resumes.In the optional tray1 Pull the optional tray open.2 Remove the jammed paper from the printer.If the paper does not move when you pull, or if you do not see thepaper in this area, stop and go to step 3.3 Pull the upper tray half way out.4 Pull the jammed paper straight up and out.5 Fully insert the trays back into the printer. Printing automaticallyresumes.
