1071. In standby mode, press the MENU key ( ), then press(for Tools), (for Voice Service), (forVoice Settings), and for Sound. The following optionsappear in the display:• Prompts — Turns audio prompts. on or off.• Digits — Turns audio digit playback on or off.• Names — Turns audio name playback on or off• Name Settings — Lets you adjust the speed and volume of yourphone’s audio name playback.2. Use the navigation keys to highlight the desired setting.3. Press the key to accept the new setting.Voice LaunchTo set the key or action that launches VoiceSignal, do thefollowing:1. In standby mode, press the MENU key ( ), then press(for Tools), (for Voice Service), (forVoice Settings), and for Voice Launch. The followingoptions appear in the display:• Key Only — Press and hold to activate VoiceSignal for onecall.• Key / EarMic — Attach a headset to your phone. Press and holdto activate VoiceSignal. Now, you can make and end callsusing VoiceSignal by pushing the button on the headset. Pressto release VoiceSignal.• Key / Flip — Press the key to activate VoiceSignal forrepeated calls. Open and close the flip to make and end calls usingVoiceSignal. Press to release VoiceSignal.2. Use the navigation keys to highlight the option you want,then press the key to save and exit.About VoiceSignalThis option causes the About VoiceSignal screen to appear in thedisplay, showing version and build information about theVoiceSignal software included on your phone. In standby mode, press the MENU key ( ), then press(for Tools), (for Voice Service), (for Voice Settings),and for About.The About VoiceSignal screen appears in the displayshowing the version level of the VoiceSignal softwarecurrently installed on your phone.BluetoothBluetooth is a short-range wireless communications technologycapable of exchanging information over a distance of about 30feet without requiring a physical connection.