PLAN 140User Memory• Memory Info — Lets you review used and available memory. (See “MemoryInfo” on page 80 for more information.)3. Use the Up and Down navigation keys to highlight USB Disk Mode.4. Press the key. You are prompted to enter the device password.Note: The default password is ‘0000’.5. Enter the device password using the keypad keys. “To avoid data lossplease eject device before removing it.” pops-up in the display,followed by the USB Disk Mode screen.You can now use the device like a USB flash drive.Disconnect DeviceTo disconnect your device from a personal computer, do the following:1. On your personal computer, eject (stop) the device-related USB drive.2. On your a523 device, in the USB Disk Mode screen. The following optionsshow in the display:• Format Disk• Disconnect3. Press the Format (right) soft key ( ) to format memory. A popupdisplays for you to select Int Memory (internal) or Ext Memory (external).4. Choose the type of memory to format, and press the key.5. Press the Disconnect (left) soft key ( ) to disconnect from USB mode.“Disconnecting” appears in the display followed by returning to the UserMemory menu.6. Disconnect the Data Cable from your device and the personal computer.Managing FilesTo manage User Memory files on your device, do the following:1. In standby mode, press the Menu (left) soft touch key ( ), then press(for PLAN), (for User Memory), and for File Manager.You are prompted to enter the device password.Note: The default password is ‘0000’.2. Enter the device password using the keypad keys. The Select Memorymenu pops-up in the display showing the following options:
