Getting Started 6Activating Your DeviceActivating Your DeviceContact your Wireless Carrier and follow their instructions for obtaining service, ifnecessary. We suggest that you read this guide to fully understand the services yourdevice supports.Install the BatteryNote: Your device comes packaged with a partially charged rechargeable standard Li-Ion battery and traveladapter.Important!: You must fully charge the battery the first time you use your device, otherwise you coulddamage the battery. You can use your device while the battery is charging, but the battery willtake longer to recharge.1. Slide the battery into the compartment so that the tabs on the end alignwith the slots at the top of the device.(1) Press the battery down until itclicks into place.(2)2. Replace the battery cover (1) and slide it toward the bottom of the device(2) until the cover clicks into place.3. Make sure that the battery is properly installed before switching on thedevice.Turn Your Device On1. Open the slide on your device.2. Press and hold the key for two or more seconds.Note: As with any other radio-transmitting device, do not touch the antenna (located at the bottom of thephone) while using your device as this can affect call quality and can cause the device to operate ata higher power level than is necessary.3. The device begins searching for a network signal.
