33Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXXOption SEG1 SEG2 SEG3 SEG4 SEG5 SEG6Explanation PAGE MODERESERVEDUse of externaltemperaturesensorUse of centralcontrolRESERVEDIndicationand DetailsIndication Details Indication Details Indication Details Indication Details0 2 0 Disuse 0 Disuse1 Use 1 UseOption SEG7 SEG8 SEG9 SEG10 SEG11 SEG12Explanation PAGE Use of drain pumpRESERVED RESERVED RESERVEDMaster / SlaveIndicationand DetailsIndication Details Indication Details Indication Details10 Disuse 0 slave1 Use 1 master2Use +3minutedelay- -Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18Explanation PAGE Use of externalcontrolSetting the output ofexternal control S-Plasma ion Buzzer control Number of hoursusing filterIndicationand DetailsIndication Details Indication Details Indication Details Indication Details Indication Details Indication Details20 Disuse 0 Thermoon 0 Disuse 0 Use ofbuzzer 2 1000 Hour1 ON/OFFControl 1 Operationon1 Use 1Nonuse ofbuzzer6 2000 Hour2 OFFControlOption SEG19 SEG20 SEG21 - - -Explanation PAGE control of a remotecontrollerHeating settingcompensation - - -Indicationand DetailsIndication Details Indication Details Indication Details - - -30 or 1 Indoor 1 0 Disuse- - -2 Indoor 2 1 2°C3 Indoor 32 5°C4 Indoor 45. Press the button to save and complete the option setting.6. Press the button to exit to normal mode.• Press button anytime during setup to exit without setting.• Option code will not be applied if you don't press button.• Setting Installation option code is available only with a master wired remote controller.• Setting Installation option code is available when there is one on one connection between a wired remotecontroller and an indoor unit.NOTE