E-9ENGLISHSelecting the Fan ModeSelect the fan mode to circulate air without changing thetemperature.1 Press the (ON/OFF) button to turn on the indoor unit.- Do not press the (ON/OFF) button if the remotecontroller is on.Result: The air conditioner will be turned on with themost recently used mode.The air conditioner has a built-in protectionmechanism to prevent the unit from being damagedwhen it is started immediately after being: Plugged in StoppedThe air conditioner will start up after 3 minutes.2 To select the FAN mode, press the button until Fan isdisplayed on the remote controller.Result: The air conditioner will operate in fan mode. You cannot adjust the temperature in fanmode.3 Select the fan speed by pressing the button.Result: Each time the button is pressed, fan speed willchange in the following order:Low Med High4 To adjust the air swing direction, refer to page 13.MWR-WH00_IB_E_31218-1.indd 9 2009-12-14 ソタタ・9:47:02