- 49 -" Anynet+ (HDMI-CEC) works only with external devices that support HDMI-CEC and only when those devices are either instandby mode or turned on." Anynet+ (HDMI-CEC) can control up to 12 compliant external devices (up to 3 of the same type) except for home theatres.Anynet+ (HDMI-CEC) can control only one home theatre system." To listen to 5.1 channel audio from an external device, connect the device to the TV via an HDMI cable and connect a 5.1home theatre system directly to the external device's digital audio output connector." If an external device has been set up for both Anynet+ and a universal remote control, the device can be controlled onlywith the universal remote control.Controlling the TV with a Keyboard or MouseConnecting a keyboard or mouse to make it easier to control the TV.Settings General External Device Manager Input Device Manager Try NowYou can connect a keyboard or mouse to make it easier to control the TV.Connecting a USB keyboard or mousePlug the keyboard or mouse cable into the USB port." If you connect a mouse, it is available only in the Internet app.Connecting a Bluetooth keyboard or mouseSettings General External Device Manager Input Device Manager BluetoothDevice List" This function may not be supported depending on the model or geographical area." If your device was not detected, position the keyboard close to the TV, and then select Refresh. The TV scans for availabledevices again." If you connect a mouse, it is available only in the Internet app.
