ŝ35ŞVoice recording / Voice memoƃ Remote control rangeƃ When taking a picture using the self-timer, the self-timer lamp works as follows :2 second self-timer setting : The self-timer lamp blinks at 0.25 secondinterval for 2 seconds.10 second self-timer setting : The self-timer lamp blinks at 1 second intervalfor the first 7 seconds. It blinks at 0.25 secondinterval for the remaining 3 seconds.ƃ If you operate the Back button during the self-timer operation, the self-timerfunction is canceled.ƃ Use a tripod to prevent camera shake.INFORMATIONWhen you take a picture by using the remote control,refer to the illustrations shown alongside about theremote control range.Self-timer / Remote control[Shutter button on theremote control]ƃ Voice memo1. Select a recording mode with the exceptionof the Movie clip mode by rotating the mode dial.2. Select the Voice memo menu by using the smartbutton. If the voice memo indicator is displayed onthe LCD monitor, the setting is completed.3. Press the shutter button and take a picture.The picture is stored on the memory card.4. Voice memo will be recorded for ten seconds fromthe moment the picture is stored. In the middle of the sound recording,pressing the shutter button will stop the voice memo.ƃ Voice recording1. Select a recording mode with the exceptionof the Movie clip mode by rotating the mode dial.2. Select the Voice recording menu by usingthe smart button.3. Press the shutter button to record a voice.- Press the shutter button once and voice isrecorded for as long as the availablerecording time allows(Max 10 hours) . The recording time will be displayedon the LCD monitor. Voice will still be recorded if the shutter button isreleased.- If you wish to stop recording, press the shutter button again.- File type : *.wavƈ A voice can be recorded for as long as theavailable recording time(Max 10 hours) of thememory capacity allows. And you can add yourvoice-over to a stored still image.RECORDMEMOOFFRECORDMEMOOFFRECORDMEMOOFFMake sure the + (positive) polarity is toward the top and the - (negative) polarity istoward the bottom while installing battery for the remote control. Replace battery forthe remote control in the local service centre. Use the CR 2025 3V battery.ƃ Replacing battery for the remote control