ŝ63ŞSetup menu[ Start up sound ]ƈ You can select the sound that is activated whenever the camera is turned on.[ Sound Volume ]ƈ You can select the sound volume levels of start sound, operation sound andshutter sound.ƃ [Sound Volume] sub menus : [Off], [Low],[Medium], [High]OffLowMediumHighStart ImageSound VolumeBEEP SoundStart SoundShutter SoundȜOffSound 1Sound 2Sound 3Start ImageSound VolumeBEEP SoundStart SoundShutter SoundȜƃ Start up sound : [Off], [Sound 1], [Sound 2],[Sound 3]OffSound 1Sound 2Sound 3Start ImageSound VolumeBEEP SoundStart SoundShutter SoundȜ[ Operation Sound ]ƈ If you set sound to ON, various sounds will be activated for camera startup,when buttons are pressed, so that you can be aware of the camera operationstatus.ƃ [Sound] sub menus : [Off], [Sound 1], [Sound 2],[Sound 3]- If you set sound to [Off], various sounds will notbe activated.Exit:BACKExit:BACKExit:BACKOffSound 1Sound 2Sound 3Start ImageSound VolumeBEEP SoundStart SoundShutter SoundȜ[ Shutter sound ]ƈ You can select the shutter sound.ƃ Shutter sound : [Off], [Sound 1], [Sound 2],[Sound 3][ Formatting a memory ]ƈ This is used for formatting the memory. If you run [Format] on the memory, allimages, including the protected images, will be deleted. Be sure to downloadimportant images to your PC before formatting the memory.ƃ Sub menus[No] : The memory will not be formatted.[Yes] : A confirmation window will display. Select the[Yes] menu by pressing the smart button.A [Processing!] message appears and thememory will be formatted. If you run FORMATin Play mode, a [No Image!] message willappear.Be sure to run [Format] on the following types of memory card.- A new memory card, or an unformatted memory card- A memory card that has a file this camera can't recognise or one that hasbeen taken from another camera.NoYesFormatDelete AllCopy to CardVideo OutResetȜExit:BACKExit:BACKƃ Always format the memory card using this camera. If you insert a memorycard that has been formatted using other cameras, memory card readers, orPCs, you will get a [Card Error!] message.INFORMATION