151Connecting & Transferring > Connecting to a smart phone4 Select the camera from the list on the smart phone. The smart phone can connect to only one camera at a time. If the Wi-Fi Privacy lock is enabled and Wi-Fi is connected, enter thePIN displayed on the camera to the smart phone.5 On the camera, allow the smart phone to connect to yourcamera or confirm the registration request. If the smart phone has been connected to your camera before, it isconnected automatically. If the pop-up message that prompts you to set the auto timesetting appears, select Yes to sync the camera’s date and time tothe smart phone’s. (p. 182)6 On the smart phone, select q to open the smart panel.7 On the smart phone, set the shooting options. While using this feature, some buttons are not available on yourcamera. The zoom button and the shutter button on your smart phone willnot function when using this feature. Some shooting options are not supported. Shooting options that you have set will remain on the camera afterthe connection with the smart phone has ended.8 Touch to return to the shooting screen.9 On the smart phone, touch and hold to focus, and thenrelease it to capture the photo. Touch to record a video and touch to stop a video. Touch to view the captured photo and send it to the smartphone. If the GPS feature is activated on the smart phone, the GPSinformation will be saved with the captured photo. When you use this feature, the ideal distance between the camera and thesmart phone may vary, depending on your surroundings. The smart phone must be within 23 ft (7 m) of the camera to use this feature. It will take some time to capture the photo after you release on the smartphone. The Remote Viewfinder function will deactivate when:- you answer an incoming call on the iOS devices- there is an incoming call on the smart phone- either the camera or the smart phone turns off- the device loses a Bluetooth or Wi-Fi connection- the Bluetooth or Wi-Fi connection is poor or unstable- you perform no operations for approximately 3 minutes while connected
