174Connecting & Transferring > Viewing photos or videos on a TVConnecting via cablePlay back photos or videos by connecting your camera to an HDMI-supported TV using an optional HDMI cable.Viewing files on a TV1 In Shooting or Playback mode, press [m] ĺ q ĺHDMI Output ĺ an option. (p. 193)2 Turn off your camera and TV.3 Connect your camera to your TV with an HDMI cable.4 Turn on your TV and select the HDMI source.5 Turn on the camera.6 View photos or play videos using the camera buttons.• If your TV supports Anynet+(CEC), you can connect the camera to the TV withan HDMI cable using the Anynet+(CEC) method.• The Anynet+(CEC) functions allow you to control connected devices using theTV remote control.• If the TV supports Anynet+(CEC), the TV turns on automatically when used inconjunction with the camera. This feature may not be available on some TVs.• You can capture photos and videos when the camera is connected to a TV,but some functions will be limited. Shooting functions are supported onlywhen HDMI Output is set to 1920x1080p or Auto on the camera and theTV’s HDMI output option is set to 1920x1080p.• When connected to a TV, some of the camera’s playback functions may not beavailable.• The length of time required to connect the camera and a TV may varydepending on the memory card being used. As the main feature of a memorycard is to increase the transfer speed, it is not necessarily true to say thata memory card with a faster transfer speed is also fast in using the HDMIfunction.• 1920X1080 (60p) videos can be played only on Full HDTVs or UHD TVscapable of playback at 60p.• To view 3D photos on a TV that does not support the 3D function, press theź button to switch to Anaglyph mode and wear anaglyph glasses.• You can also play back or capture photos or videos when you connect thecamera to an HDMI-enabled monitor. Connections and their capabilitiesmay vary depending on the monitor. Refer to the monitor’s manual for moredetails.• UHD video playback may not work properly on some TVs.