Samsung NX300 Service Manual

Also see for NX300: User manual User manual User manual Manual Del Usuario

Contents

Copyrightⓒ since 1995 Samsung Electronics. All rights reserved. 8-7Adjustment6) Make sure there is the serial number file such as “0010123.sn” in the NXCISTEMP_NX200 folder.- Type the serial number on the tap above the “STARAT” button.MAIN PCBCIS Sensor S/N- When there is no proper serial number file in the NXCISTEMP_NX200 folder, the error message will appear.7) It will automatically start the process when the “Auto Start” button color is blue, meaning the setting is activated.Press the “START” button when the “Auto Start” button color is gray, meaning the setting is inactivated.You may choose to activate (On)/inactivate (Off) this function by pressing “Auto Start” button.클릭8) Connect the USB cable from your camera to the USB port on your computer. Turn on the camera and press the “OK” button to begin the process.- During the PTP communication, the shutter speed value is set at a shutter speed of 1/2000 second and is to correspond with the measuring equipment.- The measuring equipment recognizes the shutter speed and PC read the shutter speed value.Finally the camera reads its value. (Measuring equipment -> PC -> Camera)- Camera picks the shutter speed at a shutter speed of 1/2000 second or less (0.488ms) and set it as an adjustment default value.The camera is shooting the shutter speed of 1/4000 second (0.269ms). The shutter speed value is set to correspond with the measuringequipment. The available shutter speed is set in the range between 1/2000 second (0.488ms) and 1/4000 second (0.269ms)..- Once the adjustment process is complete, the value is stored in the NOR-Flash memory. The “PASS” message will be displayed.9) Test Result- When the adjustment process is successful, the “PASS” message will be displayed.- When the process is not successful, the “FAIL” message will be displayed.10) Navigate to the directory you extracted to the NXCISTEMP_NX200.zip” file such as C:\ CIS DOT_SHUTTER SPEED\nx300\nx300SHUTTER 2.5\files\Ch1. Check whether the CSV file is created at the destination directory or not.Fig. 8-12Fig. 8-13Fig. 8-14OKDOT date does not existClick클릭