137Wireless network > Sending photos or videos via emailChanging the email password1 Rotate the mode dial to B.2 Select .• The camera will automatically attempt to connect to a WLAN viathe most recently connected AP device.• If the camera has not previously been connected to a WLAN, it willsearch for available AP devices. (p. 123)3 Press [m].4 Select Change Password.5 Enter your current 4-digit password.6 Enter a new 4-digit password.7 Enter the new password again.8 When the pop-up appears, select OK.Sending photos or videos via emailYou can send photos or videos stored on the camera via email. Forinformation about entering text, refer to "Entering text". (p. 127)1 Rotate the mode dial to B.2 Select .• The camera will automatically attempt to connect to a WLAN viathe most recently connected AP device.• If the camera has not previously been connected to a WLAN, it willsearch for available AP devices. (p. 123)3 Select the Sender box, enter your email address, and thentouch .• If you have previously saved your information, it will be insertedautomatically. (p. 135)• To use an address from the list of previous senders, select →an address.www.devicemanuals.euinformation about entering text, refer to "Entering text". (p. 127)www.devicemanuals.euinformation about entering text, refer to "Entering text". (p. 127)Rotate the mode dial towww.devicemanuals.euRotate the mode dial toSelectwww.devicemanuals.euSelectwww.devicemanuals.eu.www.devicemanuals.eu.•www.devicemanuals.eu• The camera will automatically attempt to connect to a WLAN viawww.devicemanuals.euThe camera will automatically attempt to connect to a WLAN viathe most recently connected AP device.www.devicemanuals.euthe most recently connected AP device.