87Network Settings (Wired)Connecting to a Wired NetworkThere are three ways to attach your product to your LAN using cable.• You can attach your product to your LAN by connecting the LAN port on the back of your productto an external modem using a LAN cable.See the diagram below.The Modem Port on the Wall External Modem(ADSL / VDSL)Modem Cable LAN CableLAN• You can attach your product to your LAN by connecting the LAN port on the back of your productto an IP Sharer which is connected to an external modem. Use LAN cable for the connection. Seethe diagram below.The Modem Port on the Wall External Modem(ADSL / VDSL) IP Sharer(having DHCP server)LANModem Cable LAN Cable LAN Cable• Depending on how your network is configured, you may be able to attach your product to yourLAN by connecting the LAN port on the back of your product directly to a network wall outletusing a LAN cable.See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere inyour house.The LAN Port on the WallLANLAN CableIf you have a Dynamic Network, you should use an ADSL modem or router that supports the DynamicHost Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide theIP address, subnet mask, gateway, and DNS values your product needs to access the Internet so you donot have to enter them manually. Most home networks are Dynamic Networks.Some networks require a Static IP address. If your network requires a Static IP address, you must enterthe IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screenwhen you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values,contact your Internet Service Provider (ISP).If you have a Windows computer, you can also get these values through your computer.― You can use ADSL modems that support DHCP if your network requires a Static IP address.― ADSL modems that support DHCP also let you use Static IP addresses.
