Screen MirroringMENU m → Network → Screen Mirroring → ENTER EConnect a mobile device that supports the mirroring function to the product. This allows the screen andsound from the mobile device to be outputted on the product. Mirroring refers to outputting the screenand sound from a mobile device on a display device.― To use Screen Mirroring, make sure the mobile device supports the mirroring function such asAllShare Cast, WiDi (version 3.5 or higher) and Miracast. To check if the mirroring function is available,visit the mobile device manufacturer website.― Screen or sound output may be choppy if there is network congestion.Screen MirroringRun the mirroring function from the mobile device. The mobile device automatically searches anddisplays the product in a list.― If the mobile device cannot connect to the product, turn them off and then on again, and try again.Server Network SettingsMENU m → Network → Server Network Settings → ENTER EConnect to serverTo run Player connect to a network.• If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.― Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect tothe server using port number 7001, check with your server administrator to find the correct portnumber and then change the port number.)MagicInfo ModeSelect the appropriate MagicInfo Mode depending on the environment where you are using theproduct.• Lite / PremiumServer AccessSelect a method to connect the server network.• Allow / DenyFTP ModeSpecify the FTP operating mode.• Active / Passive
