OfficeServ 100 Installation Manual/Ed.00© SAMSUNG Electronics Co., Ltd. 10-1110.2.4 Items Required for Additional FeatureThe items below shall be set before using additional features.Display Name and Number of Counter Station (Name Identification)y The options below shall be set to identify the name and number of the other partywhen calling stations on different systems.y Sets the CONP level of Program 823. The name and number is sent to the other stationaccording to the CONP level.0: Name and number is not sent.1: Sends name and number when call from another system is being connected(dialtone) or is connected.2: Sends name and number when the receiving station is busy.3: Sends name and number when the call is being connected, is connected, or when thereceiving station is busy.This option is recommended since the information is always sent unless the dialed numberis a wrong numbery In Q-SIG, the name and number is sent to the recipient according to the below optionsof Program 823. The default value is recommended since there are cases when thename and number is always sent to the recipient according to the CONP level, notaccording to these options because the OfficeServ 100 networking was supposed forconnections between iDCSsystems.(Default value is set to always send the name and number)CLIP (Calling Line Identification Presentation): YCLIR (Calling Line Identification Restriction): NCNIP (Calling Name Identification Presentation): YCNIR (Calling Name Identification Restriction): NCNIRO (Calling Name Identification Restriction Override): YCOLP (Connected Line Identification Presentation): YCOLR (Connected Line Identification Restriction): NCONP (Connected Name Identification Presentation): YCONR (Connected Name Identification Restriction): NCONRO (Connected Name Identification Restriction Override): Yy In Q-SIG, there are cases when only the name, not the number is sent to the system.Since the OfficeServ 100 networking function is supposed for connections betweeniDCS systems, if the ‘Add Number To Name’ option in Program 825 is set as ‘Yes’,the name is sent with the number suffixed and the recipient also checks of the numberis suffixed to the name.