Samsung OfficeServ 7100 Installation Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 Installation Manual© SAMSUNG Electronics Co., Ltd. 7-97.2.2 Connecting External/Additional Page EquipmentInstead of an internal speaker, external broadcasting equipment, such as amps or speakers,and additional equipment that can broadcast page(ring) signals outside a building can beconnected to the OfficeServ 7100 system. Connect external/additional page equipment tothe MISC port of the MP10/MP11 board mounted on the OfficeServ 7100 system. Thepower of the external/additional page equipment should be separately connected.The OfficeServ 7100 system supports the channels for external broadcasting and one drycontact. If a pair of External Page Equipment lines is connected to pin3 and pin6, DryContact 1 lines is connected to pin1 and pin2, Dry Contact 2 lines is connected to pin7and pin8 of the MISC port in MP10(MP11).Figure 7.11 Connecting External/Additional Page EquipmentDry ContactDry Contact is a switch that can connect or cut the power or line to externalequipment.7.2.3 Connecting Common BellCommon Bell is the ring type. So, when a ring is received through an extension of a group,all extensions of the group also receive the ring.To use common bell, connect the common bell to the MISC port mounted on theOfficeServ system. The OfficeServ 7100 system supports only one dry contact for thecommon bell.Figure 7.12 Connecting Common BellsExternal Page EquipmentDry Contact(for Common bell)Dry contact(For common bell)