Samsung OfficeServ 7400 Installation Manual

Also see for OfficeServ 7400: System administration guide User guide User instructions Technical manual General description

Contents

CHAPTER 2. Ошибка! Стиль не определен.2-2 © SAMSUNG Electronics Co., Ltd.2.2 Selecting Installation MethodThe OfficeServ 7400 cabinet can be installed on the ground, inside a 19-inch rackdepending on the number of cabinets and environment of the installation area.Caution for InstallationOnly a trained service staff can install the OfficeServ 7400 system.2.3 Installing in a RackThis section describes how to install the OfficeServ 7400 cabinet inside a 19-inch rack2.3.1 Cautions for InstallationTake the following cautions when installing the OfficeServ 7400 cabinet inside a rack:y The 19-inch rack should be a standard electric equipment rack.y When using an enclosed-type rack, check if the rack is properly ventilated. Ventsshould be equipped on the side of the rack and fans should be attached to ventilatecool air into the rack.y When using an enclosed-type rack, check if the rack is properly ventilated.Vents should be equipped on the side of the rack and fans should be attached toventilate cool air into the rack.y When using an open rack, do not block the entrance of a port or fan of the OfficeServ7400 system.2.3.2 Tools Requiredy A middle-sized cross screwdrivery A bracket and three screws for attaching cabinety Two brackets, six screws, six nuts for attaching racky Two clamp screwsFigure 2.2 Tools for the Installation inside a Rack