Samsung OfficeServ 7400 Installation Manual

Also see for OfficeServ 7400: System administration guide User guide User instructions Technical manual General description

Contents

CHAPTER 3. Ошибка! Стиль не определен.3-20 © SAMSUNG Electronics Co., Ltd.3.3.2 Mounting Interface Boards to SlotsInterface boards are mounted on slot1~slot11 of each slot(For the basic cabinet, slot3 isreserved for MP40 board). The following table describes the slot locations for interfaceboards. For the locations of Slot 0 through slot 1, refer to ‘3.1. Cabinet Configuration’section of this chapter.Table 3.9 Types of Interface Boards and Slots AvailableCategory Interface Board Slots AvailableTEPRI,8TRK,4TRK Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinetVoice C.O. lineTEPRI2 Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinet(When mounting to the expansioncabinet, only limited use of 32channels)Voice extension 16DLI, 8DLI, 16SLI, 8SLI, 8HYB16SLI2, 16DLI2, 8HYB2Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinetGWIM,GSIM Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinetLIM, LIM-P, GLIMP Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinet4DSL Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinet4WLI, MGI Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinetData voiceapplicationMGI64 Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinet(When mounting to the expansioncabinet, only limited use of 32channels)VMS SVMi-20E Slot 1, 2, 4~11 of the basic cabinetSlot 1 to 11 of the expansion cabinetFunctions and Characteristics of Each InterfaceFor detail information on functions and characteristics of each Interface board, refer to‘OfficeServ 7400 System Manual’