OfficeServ 7400 Installation Guide© SAMSUNG Electronics Co., Ltd. 1-1CHAPTER 1. Before InstallingThis chapter describes checks to be carried out when inspecting the installation site, and thegrounding and power conditions required for installing the OfficeServ 7400 system. It alsodescribes the items included in the OfficeServ 7400 package.1.1 Site InformationSelect an installation site that satisfies the following conditions for safety, temperature andhumidity:Safety Conditionsy The system should not be installed near materials that can cause a fire, such as explo-sive gas and inflammables.y The system should not be near equipment that generates electromagnetic radiation, such asmonitors or copying machines.y The location should be convenient for distributing trunk lines and extension lines, forconnecting power and grounding wires, and for maintenance and repair.y The system should not be installed in aisles or passageways that are populated or usedfor moving equipment.y Always maintain cleanliness to prevent dust from damaging the module connectionsin the chassis.y Before installing the system, check items such as the electrical wiring status, ground-ing status, voltage and frequency.Temperature and Humidityy The conditions for temperature and humidity are as follows:− Operation Temperature: 0~45°C− Storage temperature: -10~50°C− Humidity: 10~90%− Cool area out of direct sunlighty Ventilators should be installed to remove dust.